Page 7

English
BASIC OPERATIONS
Preparation for playing
Turn on the television set, amplifier or receiver to which the Player
is connected, and then select the proper channel and mode to
operate the Player, and set the sound volume to a reasonable
level.
Press the POWER button on the front panel or remote control.
The STANDBY indicator
goes out.
The display window shows the initial information as shown below.
ON/STANDBY
POWER
STANDBY
Easy start up
Without pressing the POWER button you can start up the Player by
pressing 3 SELECT button or disc buttons.
Inserting/removing the disc(s)
Press the 00
00
0 (OPEN/CLOSE) button (1 through 3) to open the disc
tray. Then place the disc in the round recess of the tray with label
side up. To close the tray, press the 00
00
0 (OPEN/CLOSE) button
again.
If you press the 0 (OPEN/CLOSE) button of the playing disc, the
Player stops and then opens the tray.
If you press the 0 (OPEN/CLOSE) button of a disc that is not being
played, you can change discs without stopping play.
Notes
• When loading a disc in the disc tray, be sure to position the disc
inside the recess. Otherwise, the disc will be damaged when the
disc tray is closed, and the disc cannot be removed from the unit.
CORRECT
CD
Tray
INCORRECT
Starting to play disc(s)
Press the 33
33
3 SELECT (PLAY) button. The Player starts to play from
the disc indicated in the Display window.
Press one of the DISC 1 through 3 buttons and the Player plays the
disc you pressed, from the 1st track. For individual track selec-
tion, use the number keys or the 44
44
4/ ¢¢
¢¢
¢ PREV/NEXT buttons.
or
SELECT
When you start play, the Display window shows disc number and the
track number being played.
During play, the indicator on the DISC button blinks.
If the PBC function is activated, the display window shows “Pb” until
you play a track, and the television screen shows the initial menu, DISC
number, and “PBC”. See page 18, “Operation of Playback Control
function”.
When you press 3 SELECT button during play, the disc will restart
from the beginning of the track except when the PBC function is
activated.
Using number keys
Press the number keys to select numbers.
On the Player.................... 1 to 20 and +20 key
Example: For number 5, press 5. For number 15, press 15. For
number 32, press +20 button, then 12. For number 42, press +20 twice,
then 2.
On the remote control..... 1 to 10 and +10 key
Example: For number 5, press 5. For number 15, press +10, then 5.
For number 20, press +10, then 10. For number 32, press +10 three
times, then 2.
12345
678910
11 12 13 14 15
16 17 18 19 20
+20
1 2 3 4
5 6 7 8
9 10 +10
Note
When you press number keys, track will start playing without pressing
3 SELECT button.
XL-MV558GD 97.8.4, 9:397