Advanced operations

5/∞/2/3

ENTER

ON SCREEN

3D PHONIC

VFP

 

ZOOM

 

Special picture/sound effect

2 Press 2/3 to select the desired preset.

Each time you press the button, the VFP mode changes as follows.

Set the video type most suitable to the current program or the room conditions.

NORMALCINEMAUSER 1 USER 2

Selected preset

USER 1

GAMMA

+ 4

BRIGHTNESS + 4

CONTRAST +13

SATURATION +13

TINT+13

SHARPNESS + 3

Y DELAY

+ 2

Parameter

Advanced

operations

To zoom in pictures

1 During playback or while paused, press ZOOM.

Pressing ZOOM causes the unit to zoom in on the image. At the top left of the screen, the information for the current magnification appears for about 5 seconds.

Each time you press ZOOM, the magnification is doubled (up to 64 times).

ZOOM x 4

When a picture of a DVD VIDEO disc is viewed on a normal TV screen (4:3, Letter Box), black bars may appear at the top and bottom of the screen. In this case, if you select the “ZOOM ⋅ 1.8” mode, the black bars become almost invisible. When a 1:2.35 or 1:1.85 DVD VIDEO source is played back, however, the black bars are visible on the screen.

2 Press 5/∞/2/3 to move the zoomed position.To return to the normal playback

Press ENTER.

NOTE

While zoomed, the picture may look coarse.

[NORMAL]: for watching TV in a general room.

[CINEMA]: for watching a movie software in a room with suppressed light.

[USER 1] [USER 2]: you can adjust parameters that affect the picture character and store the settings as a user preset. See the next step.

3 To define a user setting, press 5/∞ to select aparameter to be edited from the following.

•GAMMA

Adjust this if the neutral color is bright or dark. The brightness of dark and bright portion is maintained. Available range: –4 (darkest) to +4 (brightest)

•BRIGHTNESS

Adjust this if the picture is bright or dark on the whole. Available range: –16 (darkest) to +16 (brightest)

•CONTRAST

Adjust this if the far and near position is unnatural. Available range: –16 to +16

•SATURATION

Adjust this if the picture is whitish or blackish. Available range: –16 (blackest) to +16 (whitest)

•TINT

Adjust this if the appearance of flesh tone is unnatural. Available range: –16 to +16

•SHARPNESS

Adjust this if the picture is indistinct. Available range: 0 to +3

•Y DELAY

Adjust this if the picture looks separately/overlapped. Available range: –2 to +2

4 Press ENTER.

A window for setting parameters appears.

To adjust the picture character (VFP)

 

 

 

 

 

SATURATION

 

+ 4

 

 

 

 

 

 

Selected parameter

 

 

 

 

 

 

 

 

The VFP (Video Fine Processor) function allows you to adjust the

5 Press 5/∞ to adjust the level of the

picture character according to the type of programming, picture

tone or personal preferences.

parameter.

 

1 During playback, press VFP.

 

The higher value enhances the effect.

The VFP mode selection window appears on the TV screen.

6 Press ENTER.

 

 

Repeat steps 3 to 6 if you want to set other parameters.

16