Displaying Disc Information on-screen

You can display various information about the disc loaded on-screen.

1.Press DISPLAY to show various playback information.

The displayed items differ depending on the disc type or playing status.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 12 to 14.

To display and exit the Menu:

Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.

To go to the next level:

Press B on the remote control.

To go back to the previous level:

Press b on the remote control.

General Operation

1.Press SETUP.

The Setup menu appears.

Introduction

Installation and Setup

2.You can select an item by pressing v / V and change or select the setting by pressing b / B.

•Title (Track) – Current title (or track). number/total number of titles (or tracks).

•Chapter – Current chapter number/total number of chapters.

•Time – Elapsed playing time.

•Audio – Selected audio language or channel.

•Subtitle – Selected subtitle.

•Angle – Selected angle/total number of angles.

Note:

If any button is not pressed for a few seconds, the on- screen display disappears.

2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

3.Use v / V to select the second desired option and then press B to move to the third level.

4.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

5.Press SETUP or PLAY (N) to exit the Setup menu.

Operation

Reference

11