HDMI connection
If you have an HDMI TV or a monitor, you can connect it to this player using an HDMI cable.
1.Set the TVʼs source to HDMI (refer to TV Ownerʼs manual).
2.Connect the HDMI OUTPUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H).
3.Press RESOLUTION repeatedly to select the desired resolution.
Notes:
•Both PCM and Bitstream Audio out is available when the sample frequency is set to 48kHz in HDMI connection.
•If Audio setup is set to bitstream and your TV does not support Bitstream Audio out in HDMI connection, audio sound may not be outputted or distorted.
•When the no sound or noisy sound are outputted with HDMI connection, set the Audio option [Dolby Digital, DTS or MPEG] in SETUP menu to PCM or Off.
•The arrow on the cable connector body should face up for correct alignment with the connector on the player.
•If there is noise or lines on the screen, please check the HDMI cable.
•Not all
•If your HDMI TV does not support HDCP, the blue screen appears on the screen.
•If the abnormal picture appears on the TV screen, turn off the unit and then turn the unit on again.
Tip:
When you use HDMI connection, you can change the resolution (480i, 480p, 720p, 1080i, 1080p) for the HDMI output.
HDMI compatible TV
Rear of DVD player
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players,
HDMI was developed to provide the technologies of HDCP
HDMI has the capability to support standard, enhanced or
HDMI, the HDMI logo and
10
