Connections

Connecting the satellite (front, center, surround) speakersBefore connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Speaker cord (supplied)

•Connect the silver cords to the black (r) terminals.

•Connect the copper cords to the (q) terminals referring to the table below:

FRONT SPEAKERS (LEFT)

White

 

 

FRONT SPEAKERS (RIGHT)

Red

 

 

CENTER SPEAKER

Green

 

 

SURROUND SPEAKERS (LEFT)

Blue

 

 

SURROUND SPEAKERS (RIGHT)

Gray

 

 

Front speakers

SP-THM303F

4 m

Powered subwoofer

SP-PWM303

Center speaker

SP-THM303C

4 m

10 m

Surround speakers

SP-THM303S

 

CAUTION

 

• When installing the satellite speakers on the wall;

•

Be sure to have them installed on the wall by a qualified personnel.

• When you connect speakers other than the supplied ones, use

 

DO NOT install the satellite speakers on the wall by yourself to

speakers of the same speaker impedance (SPEAKER IMPEDANCE)

 

 

avoid unexpected damage from their falling off the wall due to

indicated near the speaker terminals on the rear of the powered

 

 

incorrect installation or weakness in wall structure.

subwoofer.

 

•

Care must be taken in selecting a location for speaker installation

• DO NOT connect more than one speaker to one speaker terminal.

 

on a wall. Injury to personnel or damage to equipment may result

 

 

 

if the speakers installed interfere with daily activities.

9