iLuvTM Stereo Docking Station for iPod V10M10_IM_EN_02022006
- 11 - www.i-Luv.com MAINTENANCE & TROUBLESHOOTING
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar
materials can damage the surface of the unit.
Troubleshooting
Symptom Possible Problem Solution
AC adaptor isn’t plugged into a wall outlet or
the connector is not plugged into the power
supply jack on the back of the unit.
Plug the AC adaptor into a wall outlet and plug the
connector into the supply jack on the unit.
Unit doesn’t respond (no power).
Wall outlet is not functioning. Plug another device into the same outlet to confirm the
outlet is working.
Used no or wrong iPod insert. Make sure the dock insert is the proper fit for your iPod. iPod does not dock properly.
iPod didn’t install properly. Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod is not installed properly. Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod does not respond to the unit.
Your iPod software is too old. Upgrade software on your iPod. For details visit
http://www.apple.com/iPod/download
play at high volume.Unit gets
warm after extended This is normal. Turn the unit off for a while or lower volume.