PROGRAMMED PLAYBACK
1.In stop mode, press the PROGRAM BUTTON "0" (flashing) wil show on the display and the program indicator will flash.
2.Press the FAST FORWARD or REVERSE BUTTON to make track selection.
3.Press the PROG BUTTON again to store the selected track number.
4.Repeat steps 2 and 3 above to program other tracks.
5.Press the PLAY/PAUSE BUTTON to start programmed playback and the program indicator will on.
6.To erase the programmed, press the PROG BUTTON and press the STOP BUTTON once or open the CD door.
NOTE: Maximum of 19 tracks can be programmed to play in any order.
SPECIFICATIONS:
Power Source | : | 120V/60Hz | |
Speaker Impedance | : | 3½" 8 ohm | |
Output Power | : | 1.5W x 2 R.M.S. | |
CD |
|
|
|
Frequency Response | : | 100 | - 16,000 Hz |
Sampling Frequency | : | 44.1 | KHz |
Tape |
|
|
|
Frequency Response | : | 100 | - 8,000 Hz |
Tape Speed | : | 4.75 | cm/sec. |
TROUBLE SHOOTING GUIDE
The unit does not operate
Is the AC power cord connected to a power outlet and fully inserted?
Is the unit turned on? Rotate the FUNCTION switch from the OFF position to turn on the unit.
No radio
Is the FUNCTION switch in the correct position? Turn FUNCTION switch to Radio.
Adjust the VOLUME knob.
Rotate the TUNING knob to find a radio station.
6
