Jwin JS-P75Portable Speaker System, Introduction, Power Source, Using The Speakers

JS-P75 Portable Speaker System

INTRODUCTION

The JS-P75 is a conveniently-packaged portable speaker system suitable for CD players, MP3 players, portable cassette decks, and personal computers. While the unit typically operates with the speakers separated, it can be closed for ease of carrying, and can also be operated while closed, requiring very little desk space (see POWER SOURCE, below).

POWER SOURCE

The JS-P75 can be powered by either four (4) AAA batteries or by an AC power adapter (purchased separately, see below).

If an AC power adapter is used (see Using an AC Adapter, below), the unit cannot be operated when in the closed condition.

The numbers in parentheses, below, are used to identify product parts. Refer to the product diagram.

Installing Batteries

1.Push the BATTERY DOOR RELEASE (7) in the direction indicated by the arrow, and lift the battery compartment cover.

2.Insert 4 AAA size batteries into the compartment, following the polarity markings (+ and –) on the case.

3.Gently close the battery compartment door until it snaps shut.

Using an AC Adapter

1.Your JS-P75 will accept an AC adapter, as long asit’scapable of providing 6 Volts DC with at least 500 milliamps of current (6 VDC @ 500mA).Theadapter’sDC plug must also fit into the JS-P75’sDC POWER INPUT JACK (4), and provide the polarity shown on the unit. AC adapters of this type may be purchased at most consumer electronics stores.

2.Plug theACadapter’sDCplugintotheunit’sDC POWER INPUT JACK (4), and then plug the AC adapter into a convenient wall outlet.

Important

For the JS-P75 to operate on installed bateries,theACadapter’sDC plug must be disconnected from theunit’sDC POWER INPUT JACK (4).

Whentheunitwilnotbeusedforlongperiods,it’sbesttoremovethe optional AC adapter from the wall outlet and the batteries from the JS-P75.

USING THE SPEAKERS

1.Gently open the unit by separating the LEFT (5) and RIGHT (6) SPEAKERS.

2.Depress the POWER ON/OFF BUTTON (1). The POWER-ON LED (2) will light.

3.Plug the black Audio Plug from the JS-P75 into the Audio Output jack of the chosen audio device (e.g. CD Player, MP3 Player, Cassette Deck, PC) to which you wish to listen. The jack on the audio device must be a standard

3.5mm (1/8”)stereooutputjack.

4.Play the audio device and adjust the VOLUME CONTROL KNOB (3) on the JS-P75 for the desired listening level.