TROUBLE SHOOTING GUIDE

SYMPTOM

CAUSE

SOLUTION

 

 

 

CD Player will not

Dead or weak batteries.

Replace both batteries.

The AC adaptor not

Check the AC adaptor connection at AC

turn on.

 

connected properly.

outlet and side of set.

 

Disc inserted incorrectly

Re-insert disc with label side facing up.

 

Defective or wrong type

Try another audio compact disc.

 

compact disc.

 

 

Disc will not play.

CD door not closed.

Close lid securely (push down left corner

 

 

of door)

 

Moisture has condensed

Take out the CD and leave the CD door

 

open for about an hour to dry the

 

inside the CD deck.

 

moisture condensation.

 

 

 

Headphone plug not

Re-insert headphone plug into the

 

inserted properly.

headphone jack (marked phones).

 

 

 

 

Headphone plugged into

Plug headphone into the headphone

 

the line out jack.

jack (not the line out jack).

No sound from

 

 

The volume control set to

Increase the volume.

headphones

minimum

 

 

 

 

 

Weak batteries.

Replace with fresh batteries or use the

 

AC adaptor.

 

 

 

Defective compact disc.

Try another compact disc.

 

 

 

 

The compact disc or lens is

Clean or replace the compact disc or

 

dirty.

clean the lens with a camera brush or

Sound is skipping

 

blower.

Too much movement of the

Reduce movement of CD player.

 

 

CD player.

 

 

Music is too loud.

Decrease the volume control level.

 

 

 

Sound in distorted

Weak batteries.

Batteries are getting weak, replace both

batteries or use the AC adaptor.

 

 

 

 

Bass boost is on and

Lower volume control or slide bass

 

music is too loud.

boost switch to off.

Tracks do not

Batteries are too weak and

Replace both batteries with fresh

change or set does

the battery symbol will

alkaline batteries, or use a AC Adaptor.

not play normally

show in display

 

 

 

 

 

Electronic or static error

Remove batteries and AC adaptor.

Buttons do not

Wait a few seconds and re-insert.

caused circuitry to lock.

Make sure batteries are fresh or adaptor

work

 

has power.

 

 

 

 

 

 

The HOLD function is on.

Slide the HOLD switch to OFF position.

 

 

 

E.7

Page 8
Image 8
Jwin JX-CD476 instruction manual Trouble Shooting Guide Symptom Cause Solution