Jwin JX-CD483D AC Operation, Battery Operation, Antenna, Bass Boost, Auxiliary AUX Mode

Portable MP3 CD Radio Cassette RecorderV10M10_IM_EN_11132007

GETTING STARTED

Location of Controls

1. CD DOOR	17. CASSETTE PLAY BUTTON
2. BASS BOOST BUTTON	18. CASSETTE RECORD BUTTON
3 VOLUME KNOB	19. LCD DISPLAY
4. FOLDER+ BUTTON	20. FM STEREO LED INDICATOR
5. FOLDER- BUTTON	21. SPEAKER LEFT
6. SKIP/SEARCH+ BUTTON	22. SPEAKER RIGHT
7. SKIP/SEARCH -BUTTON	23. CASSETTE DOOR
8. 10+ BUTTON	24. BATTERY COMPARTMENT
9. STOP BUTTON	25. FM ANTENNA
10. PLAY/PAUSE BUTTON	26. BAND SWITCH
11. MODE BUTTON	27. AUX IN JACK
12. PROGRAM BUTTON	28. HEADPHONE JACK
13. CASSETTE PAUSE BUTTON	29. FUNCTION SWITCH
14 CASSETTE STOP BUTTON	30. AC SOCK
15. CASSETTE F.FWD BUTTON	31. AC 110/ 220V SWITCH
16. CASSETTE REWIND BUTTON

AC Operation

Before operating the JX-CD483D, make sure that the voltage on the unit corresponds to the voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end into a standard AC outlet.

1.In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.

2.When not in use, unplug the AC power cord from the AC power socket.

3.You may adjust the voltage of the unit using the AC 110/ 220V switch located at “31” on Location of controls of the unit.

Battery Operation

Disconnect the AC Cord. Open the BATTERY COMPARTMENT and insert 2/UM-“C” size x 8 batteries (not included) making sure that the battery polarity (+/-) is observed.

Remove the batteries if the unit will not be used for a long period of time.

Antenna

For best FM reception, fully extend the FM ANTENNA. For AM reception, the unit has a built-in antenna, turn the whole unit for best reception.

Bass Boost

To increase bass at all volume levels, push the BASS BOOST BUTTON to ON position to boost the low frequency tone for an emphasized bass sound. To release the super bass, simply push the button again.

Auxiliary (AUX) Mode

1.Slide the FUNCTION SWITCH to the AUX position.

2.Connect the earphone socket from the Auxiliary unit (e.g. MP3 player or MD player) into AUX-INjack on the rear of this product via an Audio Line Cord (3.5mm plug on both ends; not supplied).

3.Play the Auxiliary unit. Music from the Auxiliary unit can be listened through the speaker of this product.

7www.jWIN.com