Before You Begin

Do not attempt to install this product if you do not understand the STOP instructions or if there are missing or defective parts. Improper

installation may result in property damage or in personal injury.

What You Will Need:

•Stud Finder

•Phillips Screwdriver

•Electric Drill

•1/8” Drill Bit

•9/16” Wrench (K1-F-S only)

•1/2” Wrench (K2-A1-S only)

•1/4” Drill Bit (K1-UC-S only)

To start installation, go to the section pertaining to your specific model. You can find the page number in the Table of Contents.

2

K1 & K2 Series Manual 6.0W X 4 R1.indd2

 

 

12/15/2005, 8:57 AM