K2 Mounts K2-A3-S manual Concrete or Concrete Block Wall Installation, Obtain Concrete Anchors

Concrete or Concrete Block Wall Installation

!Warning: Attaching the wall mount to a brick wall could result in property damage or personal injury.

Obtain Concrete Anchors

The hardware needed to mount to a concrete wall is not included.

Purchase at least 5 concrete anchors with a weight rating that will accomodate your screen plus the weight of the mounting bracket (about 16 lbs.).

Install Anchors

1.If you have the installation poster:

a.Tape the poster to the wall with the ACTUAL SIZE TEMPLATE side showing.

b.Install the anchors where indicated on the poster.

If you do not have the installation poster:

a.Hold the Articulating Arm/Wall Mounting Plate up to the wall where you want to mount the bracket.

ACTUAL SIZE TEMPLATE

If you have 16" on-center studs or are mounting to concrete, drill were indicated.

Turn over for installation instructions.

b. Make marks on the wall through all the left-most and right-most holes. Remove the Articulating Arm/Wall Mounting Plate from the wall.

c. Install anchors at the marks you made in the previous step.

Anchor Wall Mounting Plate to Wall

1.Anchor the Articulating Arm/Wall Mounting Plate to the wall with at least five Lag Bolts and Washers. If you use the bolts and washers from the Wall

Hardware bag, make sure that they are suitable for the anchors used.

2. Go to “Attach the Screen Plate to the Screen” section on the next page.

www.k2mounts.com