Kalamazoo Outdoor Gourmet HBS-1018 manual Models AH9AW, Kalamatic, Wet Cutting Automatic Bandsaw

Models AH9AW

KALAMATIC

9" Wet Cutting

Automatic

Bandsaw

Equipped with 2 hp, 208v/230v/460v 3ph drive motor

Operators can set-up the Kalamatic quickly and the procedure is easily learned. The feed roller and saw head is lifted, stock loaded and positioned, stock stop adjusted for proper length, the number of pieces required is entered in the counter and then the cutting cycle is initiated by the operator. After that, the saw operates automatically until all pieces are cut or the stock is exhausted.

All controls are clearly marked and are designed to also allow the operator to interrupt on automatic cycle, to cut an individual cut-to-measure piece and then to resume the automatic cycle without losing the proper count.

•Variable speed drive: 62-390 fpm

•Quick and easy blade installation

•Rotary wire brush for chip removal and improved blade life

•Cast iron 25-1/2" high bed

•Blade size: 1" x .035" x 10'-101⁄2"

•Enclosed gear box with gears in an oil bath

•Gravity fed head controlled by counterbalance springs working with a hydraulic cylinder to insure constant feed pressure on the blade

•Two (2) Year Limited Warranty

•Cutoff length capacity, 1/8"-30"standard,

•Cutting Capacity 90°...

Round tubing	9"
Round solid	4" or 2500 lbs
Rectangular tubing	8" x 10"
Flat solids	2" x 12" or 950 lbs