Kalorik CM 38933 manual Before First Use, Setting The Clock, Preparation Of Coffee

Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International USA. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change Fax +1 305 430 9692 the page numbering. Keep the language integrity. Print only

what is inside the frame.

￿

BEFORE FIRST USE

•When you use your appliance for the first time, pour fresh water into the water tank (without coffee) and switch on the appliance.

•Once all the water has passed through, switch off the appliance and let it cool down. When it is cold enough repeat the process 3 times with fresh water.

SETTING THE CLOCK

To set the digital clock, press the PROG button (10). “CLOCK” is displayed on the screen. Press the “H” button (5) until the clock displays the desired hour. Press the “M” button (6) until the clock displays the desired number of minutes. Press “PROG” button twice to exit the clock setting program.

PREPARATION OF COFFEE

•Open the lid (1) of the water tank (2) and pour the desired volume of water in it. The water level can be read off the water level indicator. Never exceed the maximum level indicated, corresponding to 12 cups of coffee.

•Insert a paper filter, or the permanent filter supplied, into the filter holder; place the removable filter holder in the cavity (3) and add the desired quantity of ground coffee using the provided scoop.

•Never forget to close the water tank lid before switching on the coffee maker.

•Put the carafe (7) with its lid closed on the heating plate.

•Plug in the coffee maker on a wall outlet.

•Press the ON/OFF button (11) once. The red light “BREW” (13) will illuminate, indicating that your appliance is in use, along with the LCD display of the clock (12). The screen will remain backlit during the whole brewing process.

•Thanks to the electronic keep warm function, your coffee will be kept warm for 2 hours, unless the coffee maker gets switched off (see below).

•Your coffee maker is equipped with a “Pause-and-Serve” aka drip stop function (9), which means that when you remove the carafe from the appliance, a non-drip valve will automatically operate to stop any drops of coffee falling onto the heating plate (8). When you put the carafe back into place, the non-drip valve opens automatically and allows the remaining coffee to filter through, into the jug.

•Wait until the brewing process is finished and the filter is empty of water before removing the carafe.

5 CM 38933 - 120501

Assembly page 5/26