Fax +32 2 359 95 50
Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change the page numbering. Keep the language integrity. Print only what is inside the frame,
ASSEMBLY OF THE BLENDER AND USE
CAUTION!
If the blade is disassembled from the bottom of the jar, check the cleaning section for mounting instructions before continuing.
•Put pouring jar on the motor block and make sure it is correctly inserted.
•Remove the lid of the blender.
•Fill the pouring jar with the chosen ingredients.
•Close the lid.
•Plug in the appliance.
•Choose the mixing speed with the button on the motor base. The position 0 corresponds to the stopping of the appliance, the position 1 to the slow speed and the position 2 to the fast one.
•The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing.
•It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up.
•Once you have finished the preparation, stop the appliance (position 0) and unplug the appliance.
•Remove the jar from the base. Then remove the lid and pour the liquid in the desired receptacle.
IMPORTANT: When mixing hot liquid, do not fill more than 1/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Add the hot liquid to mix progressively, without ever overfilling (never more than 1/3 of the volume), and do not close the feeding hole of the pouring jar with the cap, so that there will be no steam
6 | BL 16909 / 16911 - 120501 |
Assembly page 6/28
