15.The pouring jar should be assembled correctly on the motor base before you plug it into the mains. The appliance is equipped with a safety, which prevents the pouring jar from working if it is not assembled correctly. Furthermore the pouring jar should be locked so that the appliance can work.
16.The appliance is designed for the preparation of small quantities of food, which have to be consumed rather quickly. It is not designed for the preparation of large quantities at once.
17.Keep hands and utensils out of container while blending to reduce the risk of severe personal injury and/or damage to blender. A rubber spatula may be used but must be used only when blender is not running.
18.Do not use a broken, chipped or cracked blender jar.
19.To reduce the risk of injury, never place the cutting unit blades on base without jar properly attached. Blades are sharp, handle with care.
20.Always operate the blender with cover in place.
21.Always close the jar with the lid before starting mixing. When mixing hot liquid, do not fill more than 2/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Do not forget to close the feeding hole of the pouring jar with the cap.
22.Screw on blade assembly firmly. Injury can result if moving blades accidentally become exposed.
23.Do not leave blender unattended while it is operating.
24.To disconnect, press the ON/OFF key, then remove the plug from wall outlet.
SAVE THESE INSTRUCTIONS
3 | USK BL 7 - 071205 |
