Kalorik USK DA 31066, USK DA 31067 manual Spray, Self-Cleaning

￿

Note:

•There should be 3-5 seconds rest between two times of pressing Steam Button in order to obtain the best steaming result.

•Fill the water to the Max position before using this function.

•In order to prevent the water leaking from the soleplate, please do not press the steam button continuously for more than 5 seconds.

This button also allows you to iron delicate articles of clothing vertically. This feature is called "vertical steam". To do so, hang your article of clothing on a hanger, keep the steam button pressed and pass the iron to and fro in front of the article of clothing, making sure that the soleplate does not come into contact with the article of clothing. The distance between the soleplate and the article of clothing depends on the kind of textile and the creases.

SPRAY

•Produces a mist for removing stubborn creases.

•Spray can be used at any temperature setting and during either dry or steam pressing, provided there is water in the tank. Press down the spray button to spray.

SELF-CLEANING

To remove dirt and dust, the iron should be cleaned at least once a month.

•Fill the iron with water to 1/2 of its maximum capacity. Turn the steam regulator to “0” or “No Steam” position and the thermostat dial to the MIN position. Plug the iron into the mains socket.

•Turn the thermostat dial to Max position.

•Wait until the power indicator light goes off, i.e. the steam iron has reached its preset temperature.

•Hold the iron horizontally over a sink or basin.

•Press the “Self-cleaning button” and hold it down while shaking the iron lightly to eliminate the dirt. The plate gives off hot water and steam.

8 DA31066 / 31067 - 091112

Assembly page 8/16