compartment. When vacuuming liquids make sure the level of the liquid never exceeds the max level of the dust compartment. After having vacuumed liquids or humid particles, clean the dust collector to avoid smells. Then dry the filter thoroughly if necessary (see "Maintenance" section).
The small brush can be mounted on the small crevice tool and is useful to clean delicate surfaces or tissues without scratching them.
MAINTENANCE
•Cleaning the filter and the dust collector is extremely important as it allows the optimal use of your appliance and eliminates the unpleasantness due to bad smells that can occur after having vacuumed liquids or humid particles.
•Remove the dust collector by pressing the release button situated on top of the appliance (see picture D). We advise you to do this over a dustbin.
D
•Remove the filter and its holder (see picture E).
E
•Empty the dust compartment and clean it with soapy water if necessary.
•To clean the filter you can detach it from its holder. Shake it or, if necessary, clean it in soapsuds. If you use soapsuds, rinse the filter and let it dry before putting it back into the appliance.
•Once the filter is clean and dry, put it back in its holder (side covered by tissue facing the filter holder) (see
picture F), and insert the filter holder in
the dust collector. To do so, make sure F the ribs in the dust compartment face
7 | USK KS 1 - 060104 |
