BEFORE USE
•Read the instruction manual carefully.
•Remove the labels and packaging of the tea bags.
•Before preparing tea for the first time, rinse the appliance by operating it once or twice with water but without tea.
OPERATION
•Remove the jug from the base.
•Open the lid by putting the arrow of the lid in front of the arrow of the jug.
•Remove the brewing system by lifting the lid.
•Fill the jug with water to the required level, making sure that the water level is between the minimum and the maximum indication.
•Fill the filter bowl with the desired amount of loose tea, tea bags or coffee. Do not fill above the maximum line marked inside the filter bowl.
•Put the distributor plate on the filter bowl and close the lid. Ensure that the percolator tube fits into the hole in the heating element.
•The lid can now be closed.
•Select the 
position on the lid to prepare tea or coffee.
•Place the jug on the base. Make sure the jug is properly fitted to the base.
•Plug in the power supply.
•Put the power switch on “I” position. The power light will now be illuminated and the brewing will begin.
•The brewing will take approximately
•Once the brewing is completed, the power light will switch off. WARNING: This percolator makes very hot tea and coffee.
•If you do not intend to drink the beverage immediately, turn the lid to the keep warm 
position. The pilot light will go on and off everything time the heating element will switch on. With this
5 | USK TM 1 - 070327 |
