CAUTION: Do not operate on an inclined surface. Do not operate unless the element is fully immersed. Do not move while switched on.
Failure to observe these cautions may result in damage to the kettle.
Maintaining Your Kambrook Aquarius Kettle
Safety Boil Dry System
Your Kambrook Aquarius Kettle is fitted with a safety device that protects against overheating should the kettle be operated with insufficient water. In this instance, the kettle will immediately cease heating.This feature will turn the kettle off and allow the kettle to cool before further operation.The device will automatically reset itself when the unit has cooled sufficiently.
Thermal Cut-out
This feature has been built into your Kambrook Aquarius Kettle. In the event that your kettle does malfunction this feature will prevent overheating.This safety feature will automatically shut down the kettle to prevent further damage (and usage). If this does occur, please take your kettle to an authorised Kambrook Service Centre.
Cleaning
Always switch off at the power outlet and then unplug before cleaning, moving or storing the appliance.
WARNING! NEVER IMMERSE THE KETTLE, POWER BASE, CORD OR PLUG IN WATER OR ANY OTHER LIQUID
Additionally ensure that moisture does not come into contact with cords, plugs, kettle or power base.
Interior Cleaning
Removal of Mineral Deposits
Mineral deposits in the water may cause the kettle interior to discolour.
This may be removed using a Kettle
DO NOT BOIL. Empty the solution from the kettle. Fill the kettle again with clean water, bring to the boil and discard water. Repeat and the kettle will then be ready for use.
Exterior Cleaning
Always ensure that the power is switched off and unplug the kettle from the power outlet prior to cleaning.
The exterior of the kettle can be cleaned with a damp cloth and then dried
with a dry clean cloth.
Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning
as these may scratch and damage the unit.
5