Using Your Kambrook Mega Blend
Before first use remove any promotional labels and wash the blender jug and lid in warm, soapy water, then dry.
Place the blender motor base on a level, flat surface.
Place the empty jug onto the base
Place food or liquid into the jug and firmly push the lid on top of the jug.
Ensure the speed dial is in the Off (O) position.
Plug into a
When switching the unit on hold the lid down to ensure it is safely in place.
To begin blending move the speed dial from the Off (O) position to either the Low (1) or High (2) speed, depending upon mixing requirements.The speed can be changed at any time during the blending process.
When blending is complete, turn blender off by moving the speed dial to the Off (O) position.Wait until blades have stopped rotating before removing the lid or the blender jug from the base.
Use the PULSE setting for ingredients that require short bursts of power.
Hold the speed dial on this setting until desired blending is achieved.When released, the speed dial will automatically return to the Off (O) position.
If ingredients stick to the sides of the blender jug during the blending process, turn the speed to the Off (O) position,
switch off and unplug from the power outlet, then push the food back onto the blades using a plastic spatula to scrape down the sides of the jug.Then recommence blending.
NOTE: If any moisture or liquid appears on top of the motor base, wipe immediately with paper towelling
NOTE:When blending liquids a small amount of liquid may come up from around the filter cap.This is normal.
Ensure that the filter cap is correctly in place BEFORE blending. Once blending has commenced (ie/ dial is in a position 1 or 2) you may remove the filler cap and add additional ingredients.
NOTE: Ensure that the maximum level is not exceeded.
Correctly fitting the filler cap
Align the protruding nubs on the filler cap with the indents on the lid and push through.Turn the cap clockwise until fully locked into position ie/ the cap can not be turned any further and the tabs are hidden under the white of the lid.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE MEGA BLEND WHILST THE MOTOR IS RUNNING.
DO NOT PROCESS BOILING OR HOT LIQUIDS OR INGREDIENTS, LET THEM COOL BEFORE PLACING INTO THE JUG.
4
