KCL10, KDL30 and KDL40 Series Desk Lamp
| D |
O | |
O |
|
G |
|
E
U LAV
N |
|
A | |
M | |
| E |
| G |
| O |
O | |
D |
|
PLEASE READ AND FOLLOW THE INSTRUCTIONS PRIOR TO USING YOUR DESK LAMP.
Only use maximum 60 Watt incandescent B22 type globe with this fitting (No globe is supplied with the fitting).
Always place the incandescent globe into the fitting without the lamp connected to the
Ensure the lamp lead is fully unwound before turning on.
Keep the power cord well clear of the lamp shades and maintain clear access to the cord line switch (KCL10 / KDL40 series only) at all times.
Arrange cord away from traffic areas and where it will not be tripped over.
Ensure the “On/Off” switch is in the “Off” position prior to plugging the lamp into the
The desk lamp is not intended for outdoor, wet or moist location. Do not immerse or allow water to be spilt on the desk lamp.
Avoid touching lamp shade while it is on, some parts of the lamp may become hot. When moving the lamp, switch off, allow cooling down and hold the lamp by the body when carrying.
Keep combustible materials such as drapes and other furnishings well clear of the lamp shade, as the lamp shade may become hot if the lamp is left operating for a period of time.
Extreme caution and supervision is necessary when this lamp is used by or near children, invalids or animals.
Young children should be supervised to ensure they do not play with the lamp.
When not in use, pack the desk lamp in its original box for best protection and store in a cool, clean and dry location
Always turn off and then unplug the desk lamp before cleaning
Do not attempt to open or work on the desk lamp at anytime, there are no customer serviceable parts inside. Please return the desk lamp to Kambrook or an authorised service agent for service or repairs.
Use this desk lamp only as described in this instruction manual. Any other use not recommended by the manufacture may cause fire, electric shock or injury and voids all warranties.
IMPORTANT NOTE FOR THE KCL10 AND KDL40 SERIES LAMPS.
The clamping mechanisms for this series of lamps may damage raw timber surfaces when left in the same position over a period of time. Please choose the desired surface carefully.
The KDL40 series desk lamp is designed to extend into the desk area. Do not extend the KDL40 series lamp away from the desk it is mounted to as this may place undue stress on the edge of the desk and result in damaging the desk and/or lamp.
KCL10/KDL30/KDL40 | Issue 2/04 |
|
|
