KAMBROOK SAFETY
Welcome to Kambrook and your new Essentials Can Opener
Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.
FEATURES OF YOUR KAMBROOK ESSENTIALS CAN OPENER
At Kambrook we believe that the safe performance of our products is the first priority in any consumer product so that you, our valued customer, can confidently use and trust our products.
We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions:
READ ALL INSTRUCTIONS THOROUGHLY BEFORE ACTIVATING THE APPLIANCE AND RETAIN THEM FOR FUTURE REFERENCE.
Do not place on or near a hot gas burner, electric element, or in a heated oven.
This appliance is suitable for domestic use only. Do not use this appliance for anything other than its intended use.
Do not use outdoors.
The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for
1
2
6
Ensure that the power source to be used is the same as the voltage requirements of the product.
Always switch off at the power outlet and then unplug when the appliance is not in use and before cleaning.
Never immerse the power cord, plug or can opener body in any liquid.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Do not leave this appliance unattended while plugged into the power source.
professional advice.
Regularly inspect the supply cord, plug and actual appliance for any damage.
If found damaged in any way, immediately cease use of the appliance and return the appliance to the nearest authorised Kambrook Service Centre for examination, replacement or repair.
Please call 1800 800 634 for Service Centre details in Australia.
5
3
4
1.Cutter assembly
2.
3.Cutting blade
4.Drive wheel
5.Magnetic lid holder
6.Easy grip handle
2 | 3 |
