Fig. 2
To Operate the Arctic
Pedestal Fan
Plug the cord into a 230V or 240V power point and switch on.
NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your fan when it is in use.
Use the Twist Controller Switch to select the desired air flow speed setting.
0 – The fan is in the ‘OFF’ position
1 – Low
2 – Medium
3 – High
Fig. 3
Setting the Oscillation
The oscillation function works in all air flow settings.
Press down the Oscillation switch to activate. The fan will begin to oscillate from side to side.
Lift the Oscillation switch to stop the fan from oscillating.
NOTE: The Oscillation switch is located behind the Rear Grille, on the Motor head housing.
Adjustable Tilting Head
The Arctic Pedestal Fan incorporates an Adjustable Tilt Head for greater air coverage.
To adjust the angle of the head, while securely holding the shaft of the pedestal tube, simply lift or lower the Motor head housing, the head will click as it is being adjusted.
Adjustable Height
The Arctic Pedestal Fan height can be adjusted.
Simply loosen the Height Adjustable Ring on the Pedestal Tube of the fan. Then adjust to the required height.
Care and Maintenance
Always switch the Arctic Pedestal Fan off, prior to cleaning the housing, base, grilles and blades.
To clean the outside of the fan, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.
When not in use, store the fan (preferably in its original box) in a cool, clean and dry location.
7
