Using Your Low Profile Fan Heater
Before First Use
Remove any promotional material and packaging from the heater.
Unwind the cord to its full length and place the heater on a firm, level surface in a stable, upright position. Visually inspect the air inlet and outlets to ensure there are no blockages.
Turning Your Heater On
Ensure the Heat Setting dial is turned to the OFF position and Variable Thermostat dial to “MAX”.
Plug the cord into a 230V or 240V power point and switch on.
NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your heater, when it is in use.
The
Setting the Heating Mode
To control the heater, turn the Heat Setting dial as follows.
The Heat Setting dial has 4 modes: OFF - Shuts off the heater and fan
FAN 
- For fan only operation 1 - Low heat setting (1200 watts)
2 - High heat setting (2400 watts)
Turn the heater off by turning the Heat Setting dial to the OFF position.
NOTE: This heater features a tip- over switch. If the heater tips over, it will automatically switch off. Once placed back into the upright position, the heater will automatically switch on again.
8
KFH500_IB_FA.indd 8 | 12/10/09 9:49 AM |
