Using Your Kambrook Jaguar Hand vac
Remove all packaging from the unit.
Ensure that the dust cup and filters are correctly fitted.
Please charge the battery for 16 hours before first use.
To commence vacuuming, remove the hand vac from the charging base.
Push the on/off button, at the top of the unit in an upward direction to switch the unit on. You must leave your finger in the ‘on’ position when vacuuming.
When vacuuming is complete, push down on the ‘on/off’ button to the “off” position. Place the unit immediately back on the charger after each use.
ALWAYS ENSURE THAT THE DUST CUP AND THE FILTERS ARE CORRECTLY FITTED. NEVER OPERATE WITHOUT THE DUST CUP AND FILTERS IN PLACE.
Crevice tool
The crevice tool is ideal for vacuuming hard to reach places such as the edges along skirting boards, the crevice of car seats and corners.
Simply extend the crevice tool from the unit by pulling the crevice tool away from the unit.
To retract the crevice tool, press the release button under the nozzle and push the crevice back into the unit.
Cleaning the dust cup and filters
Dirt and debris picked up by your vacuum will collect in the dust cup. The dust cup should be emptied when full.
To empty the dust cup:
Always switch the appliance off prior to replacing filters or emptying the dust cup.
To remove the dust cup locate the release button situated
With the other hand hold onto the dust cup and turn in a
To empty the dust cup simply remove the two filters and empty the dirt and debris straight into a bin.
IMPORTANT: DO NOT USE THE UNIT WITH OUT A DUST CUP OR FILTERS IN PLACE
To clean and replace filters
Filters must be cleaned from time to time to remove the fine dust particles that have been collected.
1.Remove the filter pouch, followed by the filter bracket by lifting them vertically from the dust cup.
2.Shake and tap the filters until all the fine dust particles are removed.
3.The filter pouch and filter bracket can be rinsed in luke warm water. Ensure you let the filter pouch and filter bracket completely dry naturally before next use.
4.To place the filters back in the dust container firstly return the filter bracket directly into the dust cup.
5.Then simply reinsert the filter pouch into the filter bracket (which is sitting in the dust cup)
6.Place the dust cup back into the hand vac unit by fitting the grooves in the dust cup onto the locks of the unit.
7.Twist the dust cup in an clockwise position until you hear a click.
8.Place the unit back onto the charging base to charge up for its next use.
Care and Maintenance
Thoroughly cleaning the dust cup and filters on a regular basis will improve the performance of the unit.
To clean the outside of the unit, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.
Empty the dust cup on a regular basis. Clean the filters on a regular basis.
KHV100_V2.indd
22/5/07 2:50:58 PM
