USING YOUR KAMBROOK DUST HUNTER 2 HAND VAC
Remove all packaging materials and any promotional labels or stickers from your Kambrook Jaguar Dust Hunter 2. Ensure you have removed all of the accessories before discarding the packaging.
Ensure that the dust bag/filter is correctly fitted.
Locate either the crush proof hose or brush and push the connection point into the suction hole/hose inlet connection at the front of the unit until a “click” sound is heard.The brush attachments can be used alone or can connect to the end of the crush proof hose.
To use the Hand Vacuum with the shoulder strap, attach it to the unit as shown below.
Plug into a 230/240v power point and switch the power on.
To commence vacuuming, press down on the on/off switch located on top of the unit to switch on ( I )
Use your vacuum to pick up dirt, dust, food crumbs, etc from counters, carpet, bare floors, rugs, automobile interiors, upholstered furniture, etc.
When vacuuming is complete, press the on/off switch to switch off ( O ).Turn the power off at the outlet and then remove the power cord from the power outlet (when removing plug from the power outlet grasp the plug, not the cord).
ALWAYS ENSURE THAT THE DUST BAG/FILTER IS CORRECTLY FITTED. NEVER OPERATE WITHOUT THE DUST BAG/FILTER IN PLACE.
Cleaning Tools
Your Kambrook Jaguar Dust Hunter 2 includes the following cleaning tools that will make your cleaning tasks easier.
Crevice brush – Used for reaching hard to clean places such as the crevice of car seats, corners and skirting boards
Dust Brush – Used for vacuuming delicate surfaces and areas such as shelves, venetian blinds and furniture.
Turn off the vacuum cleaner when changing any attachments
Cleaning Dust Cup & Dust
Bag/Filters
Dirt and debris picked up by your vacuum will collect in the dust cup.The dust cup should be changed when full.
To empty the Dust Cup, follow these steps.
Always switch the unit off, then switch off at the power outlet and unplug the unit prior to emptying the dust cup or replacing the dust bag/filter.
To open the dust bag compartment, press the ‘Filter Release’ button located on the side of the unit, the cover will then open
Pull out the dust bag/filter, by grasping the side of the filter and pulling out.
Empty the dust from the dust cup.
The dust bag/filter must be cleaned from time to time to remove the fine dust particles that have been collected.This can be done by either shaking it or for a more thorough clean, rinsing in cold water.
You may choose to rinse the dust cup and/or dust bag/filter in cold water. Ensure dust bag has dried before replacing it back into the dust cup.
NOTE! Do not wash parts in the dishwasher. Use only mild soap and avoid detergents, cleaners or solvents that may damage the plastic.
Place the dust bag/filter carefully into the dust cup.
Attach the dust cup back onto the Hand Vacuum, by pressing the filter release button and snapping the dust cup back into place.
IMPORTANT: DO NOT USE WITHOUT A DUST BAG IN PLACE
WARNING: DO NOT IMMERSE THE HAND VAC OR CORD IN WATER OR ANY OTHER LIQUID. THE DUST BAG/FILTER IS THE ONLY COMPONENT THAT CAN BE RINSED CLEAN.
4 | 5 |
