10
How To use Shot Of Steam
The shot of steam provides an extra
burst of steam which is ideal for the
removal of stubborn creases and
wrinkles during STEAM or DRY ironing.
Turn the Temperature Control to the
hottest setting and wait until the
heating indicator light goes out. Ensure
the Steam Control corresponds to the
setting on the Temperature Control.
Lift the iron slightly above the surface
of the fabric, press the Shot of Steam
button down firmly and release it
during ironing. An intense burst of
steam penetrates deep into the fabric.
NOTE: For optimal stea m quality,
wait an interval of at leas t 4
seconds between press es of the
Shot of Steam button.

Vertical Steam Shot

The Vertical Steam Shot allows you to
use the iron for vertical applications.
This is especially useful for getting
wrinkles out of hanging garments,
curtains, wall hanging etc.
Hold the iron vertically, in front, a slight
distance from the item to be steamed
and press the Shot of Steam button.
CAuTION: Never use
the vertical steam sho t
while clothes are on
the body or direct the
steam towards people.

Dry Ironing

Turn the steam selector to the
DRY position.
This shuts off the steam flow should
there be any water in the tank.
Select the required setting on the
temperature dial for the fabric
being ironed.
Once the temperature has been
reached, the heat indicator light will
turn off and the iron is ready for use.

Using the Fine Mist Spray

The fine mist spray can be used to
dampen difficult fabrics, dry areas,
woollen items and accidental creases.
Firmly press the spray button (located
on the handle of the iron) to produce
a fine spray of water ahead of
the iron.
The spray can also be used with
delicate fabrics (synthetic) which
are ironed at low temperatures and
therefore cannot be steam ironed.
NOTE: If the spray funct ion is
operated during dry iron ing,
ensure that there is suf ficient
water in the water tank. If
dry ironing for more than 20
minutes, the water tank s hould
be emptied to prevent over
heating any water present.

Anti Drip System

The Kambrook Steamline iron is
equipped with an Anti-Drip System.
The iron will automatically close the
steam valve when the soleplate
temperature is too low to produce
steam. When this happens you will
hear a click sound. It is safe and will
not harm the performance of the iron.
This is the reason the fine mist spray
should be used when ironing delicate
fabrics at low temperatures.
The steam valve will open once
the soleplate has reached the
temperature required to create steam.
KI730_KI760_KI760P_KI780_IB_FA.indd 10 19/01/10 3:40 PM