19.Use this heater only as described in this instruction manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury and voids all warranties.
20.Always move the heater with the handle provided.
21.Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorized service agent for inspection.
22.The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit. See your electrician for professional advice.
HOW TO OPERATE
1.Remove your heater from its carton, unwind the cord to its full length.
2.Remove any element supports Guards (ie foam or paper packing) by removing the front guard screws , lift the guard outwards, support and remove element supports. Return the guard to the normal position and replace screws.
3.Remove the warning sticker from the front grill.
4.Read and follow the complete instructions before plugging the unit into the
5.Place the heater on a level surface in a stable position. Make certain the heater element control switch is in the OFF position.
6.Plug the power cord into a 240Volt outlet, the red indicator light will illuminate when the power outlet is switched on.
7.Use the switch settings on the top housing of the heater to switch the heater to the desired setting.
NEVER OPERATE THE HEATER WITHOUT THE FRONT GRILL SECURELY IN POSITION.
Temperature Settings
1.The heater has 3 heat settings.
2.The heater has a Turbo fan setting that will assist in distributing heat around the room quicker.
Note:There is a tip over switch on the base.When the heater tips over, it will turn off automatically.
4
