OPERATING INSTRUCTIONS
OPERATING YOUR KAMBROOK Stainless Steel 1.7L Kettle
BEFORE FIRST USE
Remove any packaging material and promotional labels before using your kettle for the first time.
It is recommended that before the first use to fill the kettle to the maximum level with cold tap water, bring to the boil and then discard the water. Your kettle will only operate when positioned on the power base with the ON/OFF switch in the ON position. The kettle will automatically switch off once the water has boiled.
OPERATION OF YOUR KETTLE
1.To fill the kettle with water, remove it from the power base and open the lid by pressing the button on the top lid of the kettle and lifting the lid upwards. Fill with the desired amount of water. Do not operate the kettle without water. Always fill the kettle between the minimum and the maximum marks on the water window. Too little water will result in the kettle switching off.
2.Ensure that the lid is closed and locked firmly into place before placing the kettle on the power base.
3.Place the kettle firmly onto the power base. Plug the power cord into 230/240V power outlet and switch ‘ON’.
4.Press the ON/OFF switch to the ‘ON’ position. The power ‘ON’ light will illuminate.
NOTE: Never operate the kettle dry - too little water will result in the kettle switching “OFF”.
Do not overfill the kettle - filling above the maximum mark on the water window may result in boiling water splashing from the kettle.
NOTE: This kettle must only be used with the power base supplied. Use caution when pouring water from your kettle, as boiling water will scald. Do not pour the water too quickly.
NOTE: Do not remove the kettle from the power base during operation. Ensure the kettle has switched to ‘OFF’ position after the water has boiled before removing the kettle from the power base.
5.The kettle will automatically switch ‘OFF’ once the water has boiled. Lift the kettle from the power base and pour the water. Take care to hold the kettle level, especially when filled to the maximum level. To
The kettle should be stored on its power base when not in use. The power outlet should be switched off and the power cord unplugged from the power outlet when not in use.
Caution: This appliance is designed for the boiling of drinking quality water only, never use it to heat or boil any other liquids or foodstuffs. The lid should always be firmly in place and locked closed before use.
Caution: Do not release the lid while the water is boiling. Ensure the lid is closed whilst boiling.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which protects against overheating should the appliance be operated with insufficient water. If this occurs the kettle will stop heating and automatically switch off.
Should this occur, switch off at the power outlet and unplug. Allow kettle to cool before refilling. When the kettle has cooled down, the safety device can be reset by removing and then replacing the kettle on its base.
KSK210_KETTLE_IB_FA.indd 5
20/5/09 1:50:16 PM
