Using Your Kambrook Toaster
Place toaster on dry, level surface.
Plug into a 230/240V power outlet.
Turn power on.
Place up to 2 slices (or 4 if you have purchased the 4 slice model) of desired bread, muffin or crumpet into bread slot(s).
Select toast browning level required, using the browning control dial.
The first time the toaster is used, we recommend that this control be set to number 3.
Depress extra lift lever to the locked position.Toasting cycle will immediately commence.
The toaster will automatically release the carriage and raise the toast when the desired toasting process is complete,This will also turn the unit off.
Toasting Frozen Bread
To toast frozen bread, place the bread into the bread slots, select the desired browning setting and press the carriage control lever down until it clicks into place – then press the FROZEN button.
Reheating Toast
To reheat, place toast into bread slots, lower the carriage control lever until it clicks into place and press the REHEAT button.
Extra Lift
Extra lift is ideal for removing smaller items such as crumpets or muffins.When the toasting cycle has completed, lift the
carriage control lever approx 20mm above the starting position.
Cancel Function
Manual cancelling of the toasting process can also be achieved at any time in the process by pressing the cancel button.
WARNING: Never attempt to extract jammed toast, muffins, crumpets or any other item with a knife or any other object, as contact with live elements can cause electrocution.
Never operate the toaster on its side and never add any food substances to the bread, muffins, or crumpets as this can lead to electrocution.
Do not operate the toaster without the hinged crumb tray in place.The crumb tray should be regularly cleaned. Do not allow crumbs to build up in the crumb tray.
This Kambrook toaster is electronically controlled, and will not lock down in the toasting position until the toaster is plugged into a 230/240V power outlet and switched on.
Maintaining your
Kambrook Toaster
Always turn the power off and remove the plug from the power outlet before cleaning your toaster.
DO NOT IMMERSE the appliance or power cord in water or any other liguid
Cleaning
The crumb tray should be cleaned regularly. Do not allow breadcrumbs to accumulate in the bottom of the toaster.
Exterior Cleaning
Exterior of the toaster can be cleaned with a damp cloth and wiped dry.
Never use any abrasive or chemical product to clean the exterior of the toaster.
Crumb Tray
To remove crumbs from toaster, ensure the power is switched off and then unplug from the power outlet before cleaning.
Gently shake the unit (in upright position), this is best done over sink or rubbish bin.
With thumb/finger placed in groove found on the bottom of the unit, (on the opposite side of the control panel) slide the crumb tray out.
Clean the crumb tray with dry cloth and return to toaster before using again.
If damp cloth or water is used to clean the crumb tray, ensure that the tray is thoroughly dried before placing the tray back into position.
To secure the crumb tray again, place the crumb tray back into the slot and slide in, ensure that it is clipped back into position.
4 | 5 |
