7.PROBLEM CHECKLIST
The machine you have chosen is of the highest quality. Correctly stored away from frost it should operate without problems. If a problem does arise, please check the following chart as a solution may be at hand.
PROBLEM | POSSIBLE CAUSE | CORRECTION |
Machine refuses | Plug not connected | Connect plug |
to start | Defective socket | Try another socket |
| Fuse blown | Change the fuse |
| Defective extension cable | Try without extension cable |
| Wrong mains voltage | Check mains voltage corresponds to |
|
| specifications of machin |
|
|
|
Pump stops | Fuse blown | Change fuse and check size of extension |
|
| cable |
| Overheating due to poor | Check inlet water flow rate - hose should |
| water Supply | fill a 10 litre bucket in one minute |
|
| |
Strong pressure Nozzle partly blocked | Clean dirt from nozzle hole with needle | |
fluctuations |
| and rinse from the front |
|
|
|
Machine does not | Nozzle blocked/worn out | Clean/replace nozzle |
reach operating | Inadequate mains water | Check inlet water flow rate |
pressure | Inlet hose squeezed | Straighten out hose |
| Water filter clogged | Clean filter |
| (3.1 item 4) |
|
| Inlet hose blocked | Check hose for leaks or blockages |
|
|
|
No detergent | Wrong pressure | Remove Spray Lance |
suction | Blocked Detergent Filter | Unblock Filter |
|
|
|
In the unlikely event that you need to return your machine to your supplier, please ensure that this is returned, complete with hose, gun and all accessories.
16
