￿WARNING

„Do not check for spark with the spark plug removed.

„Do not touch the high-voltage cord or spark plug cap.

„Do not stop the machine by using the choke lever.

„Do not unreasonably adjust the engine speed.

„Do not place hands or feet near moving or rotating parts.

„Do not operate machine with combusti- ble material in the muffler area.

￿CAUTION

which could cause poor engine opera- tion.

SAVE THESE INSTRUCTIONS

„Do not touch hot surfaces or allow ac- cessories to contact hot surfaces.

„The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from chil- dren.

„Remove trash, grass and other debris from around the cooling fins and recoil starter.

„Allways use new gasoline. Old gasoline could cause build up in the carburetor

WATER SUPPLY (Cold Water Only)

￿CAUTION

When connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be con- nected directly to the public drinking wa- ter supply. This is to ensure that there is no feedback of chemicals into the water supply. Direct connection via a receiver tank or backflow preventer, for exam- ple, is permitted.

Dirt in the feed water will damage the unit. To avoid this risk, we recommend

fitting a water filter.

„Garden hose must be at least 5/8 inch in diameter.

„Flow rate of water supply must not fall below 2.8 GPM (gallons per minute).

„Flow rate can be determined by running the water for one minute into an empty 5-gallon container.

„The water supply temperature must not exceed 104°F/40°C.

„Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.

„Always prevent debris from being drawn into the unit by using a clean wa- ter source. Use additional water filter.

„Do not operate pressure washer without the water turned on.

English 5

Page 5
Image 5
Karcher G 2000 MK manual Water Supply Cold Water Only, Fitting a water filter