TROUBLESHOOTING – continued
.21
•Loose fittings.
-Tighten fittings.
•Missing/worn rubber washer.
-Insert new washer.
'321
•Spray wand not properly attached.
-Attach the wand to the spray gun. Turn the wand collar clockwise onto the gun threads until tight.
•Broken
-Call Kärcher customer service hotline and order an
!3
•Pump is sucking air.
-Check that hoses and fittings are air tight. Turn off machine and purgepump by squeezing trigger gun until a steady flow of water emerges through the nozzle.
•Loose fittings.
-Check that all fittings are tight.
•Water seals are damaged or worn.
-Call customer service.
•Thermal protection device is activated.
-Thermal protection device will auto reset. Do not run pump for more than 5 minutes without spraying.
"1
•Oil seals are damaged or worn. Call customer service.
"
""#
"
WARRANTY USA
#9
WARRANTY CDN
PQ49=
1
1 1
3 1
94
>
>PQ49
+,
9
1> > 1
>@
1>1
1/9
>>
9 13 8
/ 1
119
4H1
1
9
Kärcher Customer Support USA
!
Kärcher Customer Service CDN
"
