Karcher K12 manual Assembly Instructions, Operation Controls

ASSEMBLY INSTRUCTIONS

Step1 Determine the PSI of your pressure washer.

1200 – 1600 PSI, Select the gray nozzles

1700 – 2300 PSI, Select the yellow nozzles.

GRAY YELLOW

	Step 2 Insert the 2	Step 3 Insert upper	Step 4 Insert lower handle
	matching pressure nozzles	handle into the lower	into main housing. Push down
3	in the slots on the propeller.	handle by twisting	and turn clockwise 90° to lock
		together.	in lower handle.

OPERATION CONTROLS

Spray Power Adjust height of propeller spray head. Clockwise for wood surfaces counter clockwise for stone, concrete and tile.

3

Air Flow Control Adjust the hover effect of the K12 Surface Cleaner by pushing the Air Flow Control into one of the positions from 0 – 1. The lowest position is 0 and the high- est position is 1.

Step 5 Tighten lock collar to assemble by twist- ing counter clockwise.

Step 6 Insert pressure washer wand into upper handle. Push wand down over upper handle and twist clock-wise 1/4 turn into locked position.

Step 7 Turn locking collar clock-wise over pressure washer wand until tight.

Please Note:

•For optimum setting test the spray power in an unseen area.

•Never operate in the same area for more than 2 seconds, damage may occur

•Do not use on windows..