Faults
You can remedy many faults yourself by us- ing the following overview.
If in any doubt, please contact the author- ised customer service.
Risk of electric shock
Always switch off the appliance and pull out the mains plug before care and maintenance work.
Warning
Repair works may only be performed by the authorized customer service.
Machine does not start
"Check whether the voltage indicated on the type plate corresponds to the voltage of the socket.
"Check the power cord for damage.
Pressure does not build up in the appli- ance
"Check the setting at the spray lance.
"Evacuate air from the appliance: Switch on the appliance when the HP hose is not connected and allow it to run until the water which discharges from the HP out- let is free of bubbles. Then connect the HP hose again.
"Clean the filter in the water supply con- nection: This can be easily removed us- ing
"Check all supply lines to the HP pump for leaks or blockages.
Strong pressure fluctuations
"Clean the
"Check the volume of incoming water.
HP pump leaking
"Slight leakage from the HP pump is nor- mal. If the leakage increases contact the authorized customer service.
No detergent infeed
"Clean the filter of the detergent suction hose.
"Select the
Specifications
Max. Pressure | 1400 PSI |
Water volume | 300 l/h |
Amp draw | 10 AMPS |
Voltage | 127 V / 60 Hz |
Part No. | |
Serial no. |
|
Kärcher Customer Support
Mexico
Call:
website: www.karcher.com.mx
English 13
