ASSEMBLY INSTRUCTIONS
Tools required: adjustable pliers.
Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolt, and tighten with knob.
Step 2 Attach high pressure hose to trigger gun.
3
Step 3 Attach the triple jet nozzle to the spray wand.
Step 5 Check oil level. Oil level should be to the oil filler neck. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)
Step 4 Attach the spray wand to the trigger gun.
Step 6 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.
Important! Do not run the engine with a high or low oil level as this can
cause engine damage. If you have fur- ther questions regarding the engine, please refer to the engine’s operating manual included with the unit.
