Karcher K 2.29 M manual Operation, Safety Devices, Prerequisites for the appliances Stability

„Observe a distance of at least 30 cm when using the jet to clean painted sur- faces to avoid damaging paintwork.

„Never leave the appliance unattended when it is in operation.

„Make sure that the power cable or ex- tension cables are not damaged by run- ning over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges.

„All current-conducting parts in the work- ing area must be protected against jet water.

„The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364.

„The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance.

„For safety reasons, we recommend that you operate the appliance only via a earth-leakage circuit breaker (max.

30 mA).

„Cleaning operations which produce oily waste water, e.g. engine washes, un- derbody washes, may only be carried out using washing stations equipped with an oil separator.

Safety Devices

Caution

Safety devices protect the user and must not be modified or bypassed.

Power switch

The appliance switch prevents unintention- al operation of the appliance.

Lock trigger gun

This lock locks the lever of the trigger gun and prevents the inadvertent start of the ap- pliance.

Overflow valve with pressure switch If the lever on the trigger gun is released the pressure switch turns off the pump, the high-pressure jet is stopped. If the lever is pulled the pump is turned on again.

Prerequisites for the appliance's

stability

Caution

Create stability for the appliance prior to all work on or with the appliance to prevent ac- cidents or damage.

–The stability of the appliance is warranted when it is placed onto an even surface.

Operation

Scope of delivery

The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking.

In the event of missing accessories or any transport damage, please contact your dealer.

Description of the Appliance

Illustrations on Page 5

1High pressure connection

2Detergent suction hose (with filter)

3Appliance switch "0/OFF“/ „I/ON“

4Transport handle

5Storage for trigger gun

6Storage for spray lance

7Water connection

8Coupling element for water connection

9Mains cable with mains plug

10Bearing wheel

11Trigger gun

12Lock trigger gun

13Clamp for high pressure hose

14High pressure hose

15Washing brush

16Spray lance with Dirtblaster

17Spray lance with high pressure nozzle

Special accessories

Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion.

4English