Operation

Before Startup

Mount loose parts delivered with appliance prior to start-up.

Illustrations on Page 6 and 7

Illustration

ÎInsert the transport wheels and lock them. Illustration

ÎAttach the transport handle /carrying

handle. Illustration

ÎPull out the clamp for the high-pressure

hose from the hand spray gun (e.g. a Philips screwdriver).

Illustration

ÎConnect high pressure hose to trigger gun.

ÎPush the clamp in until it locks. Check

the secure connection by pulling on the high-pressure hose.

Optional

Illustration

ÎPull the suction hose for detergent through the cover of the detergent tank until the filter contacts teh bottom of the tank.

ÎClose the detergent tank with the lid.

ÎLock the detergent tank in place on the appliance.

Illustration

ÎHook the accessories net into the hooks shown in the illustration.

Water supply

According to the applicable regula- tions, the appliance must never be used on the drinking water supply without a system separator. Use a suitable system separator manufactured by KÄRCHER; or, as an alternative, a system separator as per EN 12729 Type BA. Water flowing through a system separator is con- sidered non-drinkable.

Caution

Always connect the system separator to the water supply, never directly to the appliance! Note: Impurities in the water can damage

8English

the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended.

Water supply from mains

Observe regulations of water supplier.

For connection values, see type plate/tech- nical data.

ÎUse a fibre-reinforced water hose (not included) with a standard coupling. (Minimum diameter 1/2 inch (13 mm),

minimum length 7.5 m). Illustration

ÎScrew the supplied coupling element to the water connection on the appliance.

ÎPush the water supply hose onto the coupling unit, then connect it to the wa- ter supply.

Start up

Caution

Dry runs lasting longer than two minutes lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Troubleshooting".

Illustration

ÎConnect the high pressure hose to the high pressure connection of the appli- ance.

Illustration

ÎPush the spray lance into the trigger gun and fasten it by turning it through 90°.

ÎCompletely open the water tap.

ÎInsert the mains plug into the socket.

ÎTurn on the appliance “I/ON”.

Operation

￿Danger

The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also hold- ing the trigger gun and spray lance firmly.

Illustration

ÎUnlock the lever on the trigger gun.

ÎPull on the lever of the trigger gun; the device will switch on.

Page 8
Image 8
Karcher K 2.300, K 2.399 manual Operation, Before Startup, Water supply, Start up

K 2.399, K 2.300 specifications

Kärcher is a renowned name in the world of cleaning technology, and its range of consumer pressure washers exemplifies innovation, efficiency, and user-friendliness. Two standout models in their lineup are the Kärcher K 2.399 and K 2.300. Both machines are designed to meet the demands of light to moderate cleaning tasks, making them suitable for residential use.

The Kärcher K 2.399 is equipped with a powerful 1400-watt motor that delivers a maximum pressure of 110 bar, providing effective cleaning performance for various surfaces. It boasts a flow rate of 360 liters per hour, allowing users to tackle tasks swiftly without compromising on cleaning quality. The K 2.399 features a lightweight design, making it easily portable, and comes with an ergonomic carrying handle, ensuring convenience during use and transport.

One of the main features of the K 2.399 is the quick-connect hose system that allows for easy setup and dismantling. This model includes an integrated detergent tank, which facilitates the application of soap or cleaning solutions, enhancing overall cleaning results. The adjustable spray wand provides versatility, enabling users to switch between high-pressure and low-pressure spray settings to suit the task at hand.

On the other hand, the Kärcher K 2.300 shares many similarities with its counterpart but stands out with its slightly different design and features. It also has a powerful motor that generates up to 110 bar of pressure, catering well to light-duty tasks such as cleaning bicycles, garden furniture, or cars. The K 2.300 includes a simple trigger gun with a child safety lock, ensuring safe operation for households with children.

Both models are equipped with Kärcher's innovative nozzle technology, allowing for effective dirt removal while minimizing water consumption. Their compact and robust construction ensures durability, making them ideal for occasional use. Furthermore, Kärcher's commitment to eco-friendliness is evident in these models, as they are designed to operate efficiently, reducing energy usage without compromising performance.

In summary, the Kärcher K 2.399 and K 2.300 are excellent choices for homeowners looking for reliable and efficient cleaning solutions. With their powerful motors, user-friendly designs, and innovative features, both models simplify outdoor cleaning tasks, providing value and performance. Whether you choose the K 2.399 or K 2.300, you'll benefit from Kärcher's expertise in delivering cleaning technology that stands the test of time.