OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to the unit’s high pressure outlet.
Step 2
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension
(A) and twist into the locked position (B).
5
Step 3
Connect garden hose to unit’s water inlet using the quick connect adapter.
Step 5
Plug the power cord into the power outlet. Unlock the lock of the trigger gun (A). Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle (B).
NOTE: This unit is equipped with a pressure switch. The motor only starts up when the trigger on the gun is pulled.
Step 4
Connect garden hose to the cold water source and turn water on completely.
Step 6
Turn on the pressure washer (I).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
