WORKING WITH DETERGENTS
Kärcher Pressure washers operate at two pressures. The high pressure is used for cleaning, you cannot apply detergents when working at high pressure. To apply detergents you must be operating at low pressure.
Step 1 Install the High/Low pressure nozzle. | Step 3 Turn on the pressure washer. |
Set the nozzle to the low pressure setting by | Pull trigger to operate unit: Liquid detergent |
turning the nozzle collar. The nozzle must be | is drawn into the unit and mixed with water. |
set in the low pressure position to apply | Apply detergent to work area. Do not allow |
detergents. | detergent to dry on surface. |
Step 2 Place the filter end of detergent suction tube into the jug.
Caution
Never use:
•Bleach, Chlorine products and other corrosive chemicals
•Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
•Tri-sodium phosphate products
•Ammonia products
•
These chemicals will harm the unit and will damage the surface being cleaned.
Always Use Karcher Detergents for Best Results.
Karcher biodegradable detergents are specially formulated to protect the enviroment and your pressure washer. The special formula won´t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Karcher Detergents, check your retailer or call:
The following Karcher detergents are available:
•Vehicle Wash
•Degreaser
•Multipurpose Cleaner
For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.
7
