Install the dosage regulator for detergent
STEP 5:
Insert detergent suction tube onto the hose fitting.
Install the dosage regulator and connect using 2 screws.
Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing.
Install the high pressure hose drum
STEP 6:
Slide the free end of the coiled high pressure hose through the recess- es on the dosage regulator.
Insert the hose drum into the in- takes on the transport handle. Insert the axle of the hand crank into the guides.
Rotate and press until the crank locks in.
Install the holder bracket and se- cure it using 2 screws. 
English 7
