Troubleshooting
You can rectify minor faults yourself with the help of the following overview.
If in doubt, please consult the authorized customer service.
Danger
Turn off the appliance and remove the mains plug prior to any care and mainte- nance work.
Repair works may only be performed by the authorized customer service.
Appliance is not running
ÎCheck whether the voltage indicated on the type plate corresponds to the volt- age of the mains supply.
ÎCheck the mains connection cable for damages.
Pressure does not build up in the appliance
ÎCheck setting at the spray lance.
ÎRemove air from appliance before oper- ation.
Switch on the appliance without mount- ed spray lance and run it until the water discharging from the trigger gun is free of bubbles. Switch off appliance and connect spray lance.
ÎCheck the water supply.
ÎPull out the fine filter in water connec- tion using
Appliance does not start, motor hums Cause: Voltage reduction due to weak mains supply or when using an extension cable.
ÎWhen switching on, first pull the lever of the trigger gun and then switch the ap- pliance switch to "I/ON".
Strong pressure fluctuations
ÎClean
ÎCheck water flow quantity.
Appliance is leaking
ÎSlight leakage from the appliance pump is normal. If the leakage increases con- tact the authorized customer service.
No detergent infeed
ÎUse spray lance with pressure regula- tion (Vario Power).
Turn the spray lance to "Mix" position.
ÎCheck the settings at the detergent dos- aging regulator.
ÎClean the detergent suction hose filter.
ÎCheck the detergent suction hose for kinks.
English 9
