Pleasefollowtheseinstructionscarefully
fortroublefreecleaning.
Use the diagram on Page 6 for reference purposes.
3.2Water Connection
•According to the applicable regulations, the appliance must never be used on the drinking water net without a sy- stem separator. Use a suitable system separator manu-
factured by Kärcher; or, as an alternative, a system separator as per EN 12729 Type BA.
•The minimum length of supply hosepipe advised for maximum user convenience is 7.5 metres with a diameter of 12.5 mm (1/2") to allow free flow of inlet water to the machine so avoiding backpressure and any associated potential damage to your machine.
•Attach your supply hosepipe with its connector to the coupling on the machine (No.7) and the other end should be connected to a suitable water supply.
3.3ElectricalConnection
•Ensure the Power Switch (No.4) is in the “OFF” position before connecting the factory fitted Plug attached to the Mains Electric Lead (No.14) into an earthed socket. (it is recommended that an RCD plug socket is used.)
If using an Extension Cable make sure it is completely unwound from the cable drum and is the correct diameter.
3.4Suction Mode - an added benefit of the Karcher Pressure Washer
•If you are drawing water from a static water supply such as a water butt disconnect the water connection/hosepipe with coupling (No.7) from the machine and replace with a suction hose and filter (Part No. 4.440.238) that can be purchased as an accessory.
•Disconnect the Spray Lance from the Spray Gun.
10
