K8000G Manual 11/30/01 5:06 PM Page 4
ASSEMBLY INSTRUCTIONS
Tools required: adjustable pliers.
OPERATING INSTRUCTIONS
Step 1 Attach the handle to the frame of | Step 2 Attach high pressure hose to |
the pressure washer. Align holes, insert bolt, | trigger gun. |
and tighten with knob. |
|
Step 1 Connect the high pressure hose to the unit’s high pressure outlet.
Step 2 Connect garden hose to unit’s |
water inlet. |
3
4
Step 3 Attach the triple jet nozzle to the spray wand.
Step 5 Check oil level. Oil level should be to the oil filler neck. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)
Step 4 Attach the spray wand to the trigger gun.
Step 6 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.
Important! Do not run the engine with a high or low oil level as this can
Step 3 Connect garden hose to the cold water source and turn water on completely.
Step 4 Trigger the gun | Step 5 |
to eliminate trapped air, | Turn the engine on (I). |
wait for a steady flow of |
|
water to emerge from the |
|
spray nozzle. |
|
cause engine damage. If you have fur- ther questions regarding the engine, please refer to the engine’s operating manual included with the unit.
Step 6 Turn fuel valve | Step 7 Slide the throttle control to the fast position. Move |
on. | the choke lever to the “CHOKE” position (only if the engine is |
| cool). After starting, move the choke to “RUN”. |
