Start up
Caution
Never operate the
ÎConnect the high pressure hose to the high pressure connection of the appli- ance.
Illustration
ÎPush the spray lance into the trigger gun and fasten it by turning it through 90°.
Illustration
ÎCompletely open the water tap.
ÎInsert the mains plug into the socket. Illustration
ÎTurn on the appliance “I/ON”.
Operation
Danger
The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly.
ÎUnlock the lever on the trigger gun.
ÎPull on the lever of the trigger gun; the device will switch on.
Note: Release the lever of the trigger gun; the device will switch off again. High pres- sure remains in the system.
Spray lance with pressure regulation
Carrying out the most common cleaning tasks. The work pressure can be stageless- ly regulated between "Min" and "Max".
ÎRelease the lever on the trigger gun.
ÎTurn the spray lance to the desired po- sition.
Spray lance with dirt blaster
For particularly dirty items or areas. Not suitable for use with detergents.
Operation with detergent
We recommend the Kärcher cleaning and care program that will match the respective cleaning requirements. Please seek con- sultation or request information on the sub- ject.
ÎUse spray lance with pressure regula- tion (Vario Power).
Illustration
ÎTurn the spray lance to "Mix" position - low pressure.
Illustration
ÎPull detergent suction hose as far as is required out of the housing.
ÎSuspend end of detergent suction hose in a container filled with detergent.
Recommended cleaning method
ÎSpray the detergent sparingly on the dry surface and allow it to react, but not to dry.
ÎSpray off loosened dirt with the high- pressure ray.
Interrupting operation
ÎRelease the lever on the trigger gun.
ÎLock the lever on the trigger gun.
ÎDuring longer breaks (more than 5 min- utes), also turn the appliance off using the "0/OFF" switch.
ÎInsert the trigger gun in its holder.
English 7