Karcher RC 3000 Preparation, Unpacking, Environmental Protection, Installing the Access Ramp

Models: RC 3000

1 17
Download 17 pages 6.14 Kb
Page 8
Image 8
Preparation

Preparation

Unpacking

When you unpack the system, check that everything is complete. If there are any missing parts or you detect any transport damage when unpacking, please inform your dealer immediately.

Environmental Protection

Please arrange for the proper disposal of the packaging The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling.

Please arrange for the proper disposal of the old appliance

Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances using appropriate collection systems.

Figure 1: Unpacking the RC 3000

Installing the Access Ramp

Hold the access ramp tilted.

Insert the cut-outs of the station into the pins of the access ramp.

Press the station and the access ramp downwards until the connection locks into place.

Installation Notes for the Station

When you select the location of the station, please make sure that the robot is very likely to pass the infrared beam again and again to easily find its way back to the station (see Figures 4a and 4b).

Place the station on a level surface.

Do not place any objects directly in front of the station.

Do not lay any cables in front of the station (prevents the robot from docking).

Uncoil the power cord only to the required length.

Secure the remaining power cord in the cable hooks. Please make sure that the power cord is guided through the opening

in the housing (Figure 3).

• Connect the mains plug to a wall socket.

Cleaning a complete floor

The station is positioned in one room, and several rooms are cleaned (Figure 4a).

Cleaning a single room

The station is positioned in the room to be cleaned (Figure 4b). The appliance can be adjusted to changing room sizes by me- ans of selecting the cleaning duration (see page 12, “Selecting the Cleaning Duration”).

Figure 2: Installing the access ramp

Figure 3: Placing the station

Figure 4a: Cleaning a complete floor

Figure 4b: Cleaning a single room

8 – English

RC 3000

Page 8
Image 8
Karcher RC 3000 manual Preparation, Unpacking, Environmental Protection, Installing the Access Ramp