Cartridge filter
(already installed in the appliance)
The cartridge filter must always be in- stalled - with wet and dry vacuuming. Note: Let the wet cartridge filter dry pri- or to using it for dry vacuuming.
(see description / illustration )
Suction hose with handle
Slide the suction hose into the connec- tion, it will lock into place.
(see description / illustration )
In order to disconnect it, push down with your thumb and pull the suction hose out.
Suction tubes 2 x 0.5 m
Connect both suction pipes and con- nect them to the suction hose.
(see description / illustration )
Crevice nozzle
For edges, joints, heaters and hard to reach locations.
Floor nozzle
(with inserts)
Use the appropriate insert for vacuum- ing on hard surfaces and carpets. (see description / illustration )
Hard surfaces, wet vacuuming: Use the insert with 2 rubber lips (or with a rubber lip and bristle strips).
Hard surfaces, dry vacuuming: Use the insert with 2 bristles (or with a rub- ber lip and bristle strips).
Carpets, wet and dry vacuuming: Work without an insert.
Adapter
To connect the suction hose with an electric tool.
(see description / illustration )
Adapt the adapter to the connection di- ameter of the electric tool using a knife if necessary.
Operation
Always work with an inserted car- tridge filter - during wet as well as dry vacuum cleaning!
Before Startup
Illustration
Mount loose parts delivered with appli- ance prior to
Illustration
Insert and lock the appliance head.
Start up
Illustration Connect accessories.
Illustration
Plug in the main plug.
Illustration
Turn on the machine.
Dry vacuum cleaning
Work only with a dry cartridge filter!
Caution: Always use a
Wet vacuum cleaning
Attach the accessories to vacuum mois- ture or wetness to the suction pipes or directly to the handle.
Caution
Immediately switch the appliance off or pull the power plug if foam forms or liquids escape! Note: If the container is full a float closes the suction opening and the appliance works at a higher speed. Switch off the appliance imme- diately and empty the container.
Working with electrical power tools
Adapt the adapter to the connection di- ameter of the electric tool using a knife if necessary.
Illustration
Connect the adapter to the handle of the suction hose and connect it to the electric tool connection.
English 7