Broadband amplifier | VWS 220 |
| 230639 |
•Broadband amplifier
•Compensates the attenuation of 30 m coaxial cable LCD 90.
•Integrated DC bypass for both amplifier circuits. Each circuit 400 mA max.
•Power supply to the amplifier either via the horizontal output or the DC input1)
•The unit corresponds to: EN
EN
EN
Type |
|
|
| VWS 220 | |||
Order no. |
|
|
| 230639 |
| ||
Inputs |
|
|
| 2 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Frequency range | MHz |
| |||||
Gain | dB |
|
|
| |||
Noise factor | dB |
|
| 7 |
|
| |
Max. output level | dBµV |
|
| 1053) / 954) |
| ||
Current drain | mA |
|
| typ. 65 | |||
Ambient temperature | °C |
|
| - 20 bis + 55 | |||
1)Attention! For power supply to the amplifier only use the Kathrein power supply unit NCF 18, Order no. 230636. Power supply to LNBs via the DC input is not possible.
2)Frequency dependent amplification which compensates the cable loss.
3)Interfering signals 3rd order relative to 35 dB I mod., 2 transmitter measurement method acc. to EN
4)Interfering signals 2nd order relative to 35 dB I mod., 2 transmitter measurement method acc. to EN
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electro- nic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a relevant official collection point.
935.1993/A/0705/1.2e
