4. TRANSMIT MIDI PROGRAM CHANGE ON/OFF
You can use 7 tone buttons to transmit Program Change Numbers via MIDI. Please refer to the list below for assignment of tone and program number.
TONE NAME | PRG # | PRG # (When |
CLASSIC GRAND | 1 | 1 |
MODERN PIANO | 2 | 2 |
E.PIANO | 3 | 5 |
CHURCH ORGAN | 4 | 20 |
HARPSICHORD | 5 | 7 |
VIBRAPHONE | 6 | 12 |
STRINGS | 7 | 49 |
(1)If you press any
(2)Release both hands after selecting either “on” or “off” for transmit MIDI program change.
When the power is first turned on, the TRANSMIT MIDI PROGRAM CHANGE function is always “on”.
5. TURNING MULTI-TIMBRAL MODE ON/OFF
Normally, the procedure described in the MIDI CHANNEL SELECT section is used to transmit or receive data on only one MIDI channel (any one of 1 through 16). But by turning the MULTI TIMBRAL function “on”, you can receive data on more than one MIDI channel and simultaneously play a different sound on each channel. With this feature, you can use a sequencer such as the Q- 80EXE or sequencing software on a personal computer to create performances with a variety of timbres on the piano. The term “Multi Timbral” is derived from the ability to play multiple timbres simultaneously.
NOTE:
You can assign any tone of the piano to any channel in the way you like by sending the correct Program Change Number to the piano from an external MIDI device. Please refer to the list above for assignment of tone and program number.
(1)If you press any
(2)Release both hands after selecting the desired setting.
When power is first turned on, the
– 16 –
